Planer T45 Contour: For profiling and planing the entire width

The name says it all. The T45 Contour offers worldwide unique solutions for the safe profiling of surfaces in one pass.

Thicknessing planer with integrated profiling machine

You can choose between the Contour15 and the Contour25 achieving a profile depth of 15,5 or 25 mm respectively. Both machines come with the “Contour Planing” cutterblock with 4 TERSA knife pockets as well as 2 corrugated back knife pockets. If your main focus is on profiling you can choose the “Contour Profiling” cutterblock equipped with 2 TERSA knife pockets and 4 corrugated back knife pockets. For thinner workpieces you should consider the vaccuum table. This option in combination with a vacuum pump enables you to machine very thin workpieces.

Controlled by intelligence

Both Contour machines are equipped with an efficient control unit, whose storage capacity is particularly advantageous in profiling work. The precise positioning of the thicknessing table, with an accuracy of 0.1 mm, is even more important for profiling as it is for planing. Furthermore, the Contour machine’s control system recognizes if profile cutters have been inserted into the cutterhead, ensuring a safe working environment thanks to its intelligent monitoring.

It’s so easy to set up the profile

Profile knives can be inserted into the four cutterhead knife pockets in both machines. The cutters can be inserted radially or axially and with the supplied setting gauge, set-up times can be reduced considerably. Profiles can be planed up to 630 mm wide and 25 mm deep quickly, easily and accurately. The T45 Contour opens up a unimaginable range of new products and possibilities. Besides planing, you can profile complete church pews seats in one pass. Cabinet door manufacturers can specialize providing profiled door panels to their customers. Decoratively profiled billiard table aprons can also be achieved with this unique machine. In brief: The T45 Contour is the first choice wherever wide profiles have to be produced in one pass.

Clever combination saves space

Clever combination saves space Unlike combination machines, the MARTIN T45 and T54 function without the need for timeconsuming changes and, thanks to the spacesaving installation, both of the machines fit together in small footprint. In contrast to the combination machines, both MARTINs can also be operated at the same time and because of their close proximity to one another, they can even be operated by one person. The dust collection ports can be attached to either the left or right-hand side of the T45, allowing you to optimize your dust collection system without restricting material and work flow within your facility. Of course, both T45 Contour machines can also be combined with the T54 for a perfect „planing and profiling center“. You can create unique possibilities with this duo, going far beyond the combinations that have been familiar to our industry so far.